Why Saltwater Chlorination?
It is healthier. Irritation to eyes and ears is eliminated. Unpleasant taste and odour is greatly reduced. No more expensive & hazardous chlorine. Fully automatic chlorination.

Electrolytic Cells
The Electrolytic Cell has two titanium mesh plates separated by insulators. The anode plate has a precious metal oxide coating which creates the electrolysis process.

The cell case housing is constructed of clear PVC to enable the chlorine manufacture to be visible while operating.

	M140 CELL Chlorine output: 140 mL per hour. Running Cost: 160 Watt / 0.6 amp Suitable for pools up to 70,000 litres (17,000 gallons.)
	L210 CELL Chlorine output: 2100 mL per hour. Running Cost: 2400 Watt / 1 amp Suitable for pools up to 100,000 litres (24,000 gallons.)
	SPA CELL S70 Chlorine output: 70 mL per hour. Running Cost: 80 Watt / 0.3 amp Suitable for all spas.

Power Unit Models

Super Model	Deluxe Model

 

 

Auto Cleaning Electrolytic Cells
The Electrolytic Cell has two precious metal oxide coated titanium anode plates separated by insulators. A reversing DC voltage is applied to the cell and chlorine gas is produced without any calcium build up on the plates. These cells require no maintenance and have a clear cell case to enable the chlorine manufacture to be visible while operating.

	AUTO 150 CELL Chlorine output: 150 mL per hour. Running Cost: 160 Watt / 0.6 amp Suitable for pools up to 70,000 litres (17,000 gallons.)
	AUTO 300 CELL Chlorine output: 300 mL per hour. Running Cost: 320 Watt / 1.2 amp Suitable for pools up to 150,000 litres (36,000 gallons.)
	AUTO 200 CELL Chlorine output: 200 mL per hour. Running Cost: 240 Watt / 1 amp Suitable for pools up to 100,000 litres (24,000 gallons.)
	SPA CELL AUTO 75 Chlorine output: 75 mL per hour. Running Cost: 80 Watt / 0.3 amp Suitable for all spas.

Power Unit Models

Super Model	Deluxe Model

 

How Does It Work?
Salt is added to the pool water. After the salt is completely dissolved, your pool or spa water should read approx 0.6% salt content. (Sea water is 3.5%)

The slightly salinated water then passes through the electrolytic cell and this produces chlorine gas, which prevents algae and purifies the pool or spa.

Salt is only lost by rain overflow, splash out or filter backwashing. Experience has shown that about 6 bags (150kg) of salt per year is required to maintain adequate salt level, for an average size pool.

Providing pool chemistry is maintained at the correct levels, no powder or liquid chlorine should be added.

FOR USE IN AUSTRALIA, NZ AND EUROPE ONLY.

This equipment is supplied with instructions . If in doubt, engage an appropriately licensed pool technician to install in a domestic situation.